< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=2295438394593633&ev=PageView&noscript=1" />
Cork Faced MDF Coasters — Cork Top, Wood Core, Made to Your Drawing
video

Cork Faced MDF Coasters — Cork Top, Wood Core, Made to Your Drawing

A natural cork face is bonded to a wood-based core.
The cork surface is the layer the glass sits on.
The wood-based core keeps the coaster flat.
The product is built for hospitality tables, branded gift programs, and retail sets.
The size range is 65–150 mm.
The MOQ is 500 pcs.
Samples are available in 3–5 days.
The company was established in 2007.
The plant covers 22,000 m².
There are 15+ production lines.
The company exports to 40+ countries.
The quality system is ISO 9001:2015.
Send Inquiry

Description

Technical Parameters

Section through a cork faced MDF coaster: a 3 mm unsealed natural cork face on an 8 mm MDF core, 11 mm total, with a 45 degree chamfer at the rim

Schematic drawn from the confirmed specification, not a photograph. Photography of the real part is pending; until it exists this page carries a drawing. A stock shot of somebody else's coaster would tell you nothing.

 

Cork faced MDF coaster - six numbers that decide the order

If these six do not fit your drawing, the rest of the page will not change your mind.

Face Natural cork sheet, 3 mm, 500–550 kg/m³
Core MDF board, 8 mm
Total thickness 11 mm ± 0.3 mm
Diameter tolerance ± 0.5 mm on every size, two-way
MOQ 500 pcs custom / 200 pcs unprinted
Lead time

Sample 3–5 days · Bulk 14–20 working days

Technical specifications

Product name Cork Faced MDF Coaster
Face material Natural cork sheet (agglomerated), 3 mm nominal
Face density 500–550 kg/m³
Core material MDF board, 8 mm nominal
Core thickness 8 mm nominal
Total thickness 11 mm nominal, ± 0.3 mm
Diameters 65 / 90 / 95 / 100 / 108 / 120 / 150 mm
Diameter tolerance ± 0.5 mm (two-way)
Shapes Round, square, hexagon; custom die-cut
Edge 45° chamfer, ≤ 0.5 mm. The rim is the laminate seen edge-on: cork, then a pale 8 mm wood band. That band is the core, and it is meant to be visible.
Surface Unsealed natural cork. No lacquer, no wax, no film. Absorbs condensation; wine and coffee will mark it.
Cleaning Wipe with a damp cloth, dry it flat. Not dishwasher safe, never soak it.
Logo methods Laser engraving, screen print, UV print - limits below
MOQ 500 pcs custom / 200 pcs unprinted
Sample / bulk 3–5 days / 14–20 working days after approval
Monthly capacity 500,000 pcs/month, whole plant, all products combined
Packaging 2 pcs/PE bag, 200 pcs/carton, 46×29×16 cm, 13.0 kg G.W.
Pallet 20–30 cartons per pallet
FOB port Qingdao or Ningbo
Quality system ISO 9001:2015
Environmental system ISO 14001:2015
Storage 6–8% moisture content, stacked flat, dry, away from direct heat

The core is MDF, and your kitchen scale can prove it. The old page said MDF in the table and HDF in the text. It is MDF - 8 mm, about 700–720 kg/m³. A Ø100 × 11 mm piece weighs 57 g: the cork layer accounts for 12–13 g, so the core must be carrying 44–45 g over 62.8 cm³, which is MDF. An 8 mm HDF core at 800 kg/m³ and up would put the same coaster near 66 g. Weigh one before you trust the word on the sheet: same word now appears on this page, the spec sheet, the PI and the carton label.

 

What it costs, and what moves the number

Indicative band: US$0.15–0.85 per piece, FOB Qingdao or Ningbo, with packing included and freight or duty excluded. The band is wide because three things move it: how big the disc is, how many you need, and how the logo goes on.

$0.50–0.85

500–5,000 pcs · Ø120–150 · engraved, or two-color print

$0.25–0.50

5,000–50,000 pcs · Ø90–120 · single-color screen print

$0.15–0.25

50,000+ pcs · Ø65–100 · unprinted or laser

 

These are bands we quote inside of, not a price list. The number on the PI is the binding one, and it does not move once the sample is approved.

MOQ 500 pcs custom (printed or engraved) · 200 pcs unprinted
Samples 3–5 days, free; you cover the courier
Bulk 14–20 working days after sample approval
Payment T/T, 30% deposit, balance before shipment
Claims 30 days from receipt · under 1% settled on photographs - nothing ships back
Quote Within 24 hours of your drawing: cup base, quantity, logo method
FOB Qingdao or Ningbo - one port, named on the PI
Packing 2 pcs/PE bag · 200 pcs/carton · 46×29×16 cm · 13.0 kg G.W. · 20–30 cartons per pallet

 

Which diameter fits your glass

 

Measure the base of the glass, not the rim. The rule behind every row is coaster Ø ≥ cup base Ø + 21 mm: 20 mm leaves 10 mm of margin per side, and the extra 1 mm is reserved for the ±0.5 mm diameter tolerance. Boundaries use the worst case, D_min = D_nominal − 0.5 mm, and each upper bound is D_nominal − 21, rounded down to a whole millimeter.

Top view of a 100 mm coaster with a 79 mm cup base drawn on it, leaving 10 mm of cork showing on each side; the rule is coaster diameter at least cup base diameter plus 21 mm.

The dashed circle is where a Ø79 mm glass base sits on a Ø100 mm coaster: 10 mm of cork shows on each side. Add 21 mm to your cup base, round up to the next size in the table, and the tolerance is already covered.

 

Cup base Ø Coaster Ø Why this row
≤ 44 mm Ø65 Espresso and tasting cups
45–69 mm Ø90 Small tumblers, rocks glasses
70–74 mm Ø95 Standard pint and highball
75–79 mm Ø100 Wide tumblers
80–87 mm Ø108 Flight paddles, beer tasting boards
88–99 mm Ø120 Wine glasses, decanters
100–129 mm Ø150 Oversized jugs; above 120 mm this edges into placemat territory
Other Send a drawing or one sample. We confirm sizing before sampling.

Intervals are continuous and do not overlap, and every boundary has the diameter tolerance already deducted. If you measure 69.5 mm you are in the next row - intentional, not a gap. 130 mm and above goes to the drawing row.

 

Four ways to build a coaster, and who should not buy this one

Type Best for Cost What to know
Cork face + wood core (this page) Hospitality tables, tactile brand work, engraved logos Mid Two dissimilar layers. Must be kept dry and flat; it will not survive a dishwasher.
Printed MDF + cork back Full-color photo artwork, gradients, Pantone-matched campaigns Low–mid The cork is underneath - you lose the cork texture on top.
Solid cork, no core Lightweight promotional giveaways, mailers Low Flexes. On thin glassware and uneven tables it can rock; edges chip sooner.
Ceramic or stone Permanent table settings, heavy outdoor use High Loud on a wooden table, breaks if dropped, expensive to ship in bulk.

If your artwork is a full-color photograph, buy the printed MDF version instead. It is a better product for that job and usually cheaper. Engraving a photograph into cork gives you a brown smudge, not a photograph. And if you need a coaster that goes through a commercial dishwasher, none of the four is right - we do not make that, and we will not tell you this one will do it.

 

Logo methods and their limits

 

Laser engraving

A CO₂ laser removes cork; there is no ink in the mark, which is why it is permanent and single-toned. The cork face is 3 mm thick; we hold engraving depth to ≤0.5 mm.

Limit: one tone, no gradients, no white ink; detail below ~0.3 mm line width fills in and the cut edge darkens.

Screen print

Crisp spot colors, the cheapest route for a one- or two-color logo at volume. Each color needs its own screen.

Limit: one or two spot colors, minimum line width ~0.4 mm; the ink sits on the surface and wears first at the rim of the glass.

UV print

Full color and fine gradients on a prepared surface.

Limit: primer and cured ink form a film on the face, so a UV-printed coaster is no longer an unsealed cork coaster. We quote it as a separate build, and the food-contact question then belongs to the ink supplier's report, not to ours.

We do not offer dye-sublimation onto a bare cork face. Sublimation needs a polyester-coated, smooth, heat-stable surface; cork is porous and degrades at the temperatures that process requires.

 

Six things that go wrong, and what we do about them

 

"It passed incoming inspection flat. Then two weeks on the table, the corners lifted."

A · Anomaly

1. The coaster that warps after it reaches the table

Glasses start to rock, and nobody connects it to the delivery. The cause is not the adhesive. A cork face and a wood-based core take up moisture at different rates and expand by different amounts, so a humidity change bends the laminate toward the slower side. A single-sided construction has nothing to balance it.

Thicker cores resist the bend. Printed coasters get away with 3–4 mm board; we specify 8 mm. We measure flatness across the diameter with a straightedge and a feeler gauge at the highest point, and every batch carries the reading and the gauge position on its inspection sheet. The acceptance limit we work to lives on that record: ask for it, then run your own rock test against it.

How to check us: ask for the last batch's flatness record and the gauge position, then lay a sample on a glass offcut and try to rock it. A 0.5 mm lift is visible with a ruler.

 

"Lift the iced glass, and a fine brown ring stays on the cork."

B · Scene

2. Dust that follows the glass to the next table

That dust is loose cork from face sanding and the cut edge, not a bond failure. Cork is cellular; cutting opens cells and leaves fragments, and it gets worse with coarse belts or edges that are not cleaned after routing.

We control it at the edge-cleaning step and check with a plain white sheet: ten firm strokes across the face, and the sheet has to come away clean. There is no lacquer here to lock those fibers down, so the edge clean is the entire control - which is exactly why we test it instead of asserting it.

How to check us: take a plain sheet of printer paper and wipe the sample yourself, ten firm strokes. If the paper browns, the edge was not cleaned. Thirty seconds, no equipment.

 

"It must be the glue."

C · Self-correction

3. Our first answer was wrong, too

Changing adhesive brand does nothing. A 3 mm cork face at 500–550 kg/m³ and an 8 mm MDF core at about 700–720 kg/m³ differ in stiffness and moisture response in the same direction, so any moisture gradient through the piece produces a bending moment the thin face cannot resist.

What works is the layer ratio and one discipline: keep the back face as dry as the front, and bring both layers to 6–8% moisture before bonding. We record the conditioning reading for every batch, and we will show it to you. The press cycle and the adhesive formulation are proprietary; nobody has ever been able to test them anyway. The layer ratio above is the part you can measure yourself, and it is the part that predicts the behavior.

How to check us: ask for a cross-section sample and measure both layer thicknesses with a calliper. The ratio should match the specification within ±0.3 mm. That ratio predicts the behavior, and you can measure it on your desk.

 

"A number you can verify without believing us."

D · Quantity

4. 57 g.

That is what a Ø100 mm, 11 mm coaster weighs on our scale, and what yours should read within a couple of grams.

Cork layer: π × 5.0² × 0.3 cm = 23.6 cm³ × 0.50–0.55 g/cm³ ≈ 11.8–13.0 g MDF core: π × 5.0² × 0.8 cm = 62.8 cm³ × 0.70–0.72 g/cm³ ≈ 44.0–45.2 g Total: ≈ 56–58 g before adhesive and finish Overall: 57 g ÷ 86.4 cm³ ≈ 660 kg/m³

The overall density is high for a cork product, because this is a laminate: 44 of the 57 grams are the MDF core. Judging it against the 450–550 kg/m³ range used for solid pressed-cork coasters is the wrong test, and it is the test a competitor will try to sell you on.

How to check us: ask any supplier for a single-piece weight, then divide by the volume. A kitchen scale and a calliper are enough. A supplier who cannot produce that number usually cannot hold the thickness either.

 

"The reorder doesn't match the first batch."

E · Dialogue

5. Natural material, held to a geometric standard

We hear this about color most, and it is fair. Two lots of cork sheet will not be identical, and a laser marks darker on a denser patch. Nobody can hold an exact shade match between natural cork lots.

What we can hold is geometry and process: diameter ± 0.5 mm, thickness ± 0.3 mm, the same die, the same face-supplier lot where the order allows, and a retained approved sample from every batch kept for 12 months. If your brand needs a color-critical match on a natural face, no supplier can give it to you. Move the job to the printed MDF version, where the face is printed ink and the problem disappears.

How to check us: ask us to pull the retained sample from your last order and photograph it beside the new batch. Ask any supplier to do the same. The ones who keep samples answer in a day.

 

"The launch date does not move."

F · One line

6. A container that misses the date is not late, it is useless

500,000 pcs/month is a whole-plant figure across all product lines, not a dedicated line for this coaster. We say so because a buyer planning against that number without the qualifier plans wrong.

Peak season runs September to December for gift programs. In that window a slot is held only against a confirmed deposit and an approved sample.

How to check us: ask for a written production slot with a start date, a finish date and the lock condition before you pay a deposit. If the slot is not in writing, it is not a slot.

 

The face is raw cork. It absorbs, and it will stain.

 

There is no lacquer, no wax and no film on this face. We chose that on purpose. A sealed pore cannot absorb, so a page promising both "sucks up spills in two seconds" and "repels wine stains" is describing two different products on one disc. This page sells the absorbent one.

What that means at the table. Condensation goes into the cork instead of running down onto a varnished bar top, which is the whole point. Leave red wine or black coffee standing on it overnight and a ring stays, permanently. In a venue that pours a lot of red, plan on replacing a share of them each quarter, or engrave a dark mark where the glass sits so the ring reads as part of the design. Test it before you order: one drop of water on the sample. On this face it darkens and sinks in. If the drop beads, you have been sent a lacquered coaster, which is a different product and a different price.

Care is one line: wipe with a damp cloth, dry it flat, never soak it, never put it in a dishwasher. The core is MDF, and MDF swells where water stands on an unsealed edge.

 

Where these get used

Espresso service - Ø65, unsealed face, engraved café mark.

Pint and highball service - Ø95–100, the standard hospitality size. Where red wine and coffee are in play, expect to replace a share each quarter, or engrave a dark mark that turns the staining into the design.

Tasting flights and brewery boards - Ø108, hexagon or custom die-cut.

Wine and decanter service - Ø120, where flatness is most visible.

Oversized jugs and shared tables - Ø150; above 120 mm this is a placemat-edge size.

Branded retail and gift sets - 2 pcs/PE bag or a printed sleeve.

 

From drawing to dispatch

 

Drawing or physical sample - day 0.

Size and edge first, then the logo - within 2 days. The face stays unsealed; what gets fixed here is the diameter, the shape, the chamfer and where the mark goes - none of it can change after lamination.

Sample - 3–5 days, with a retained counterpart kept here.

Approval and deposit - the production slot is then locked.

Bulk production - 14–20 working days after approval.

Packing and dispatch - 200 pcs/carton, 46×29×16 cm, 13.0 kg G.W., 20–30 cartons per pallet.

Sea freight runs 30–38 days to Europe and the US East Coast, 14–18 days to the US West Coast, quoted by route; we don't promise one number for all lanes. This page names Qingdao or Ningbo because we ship from inland Shaanxi and quote both; your PI names one port and the booking uses that one.

 

The factory behind the page

Xi'an Tianlei Rubber Technology Co., Ltd. was established in 2007 on a 22,000 m² site, 12,000 m² of it under roof. Fifteen-plus production lines run four product families - stoppers, coasters, sheets, sport products. Those lines are plant-wide: no line belongs to this coaster alone, and we would rather say so than let you plan against a number that is not yours. Exports go to more than 40 countries. No.3, Tuanjie Rd., Ind. Park, Caotang Town, Xigao New Huyi Dist., Xi'an, Shaanxi, China. Phone +86 182 5800 8938. Factory visits and video walkthroughs are arranged on request, because a photograph of a plant proves nothing you can check.

No customer logos and no case studies on this page. The previous version carried a brewery testimonial and a sales figure that nobody could source, so it is gone and it is not coming back anonymised. When a customer agrees in writing to be named, their words go here - not before, and never invented.

 

Questions buyers actually ask

Which diameter do I need for my glass?

Measure the base, then use the selection table above. Outside those ranges, send a drawing and we confirm before sampling.

 

Can I have a custom shape?

Round, square and hexagon are stock dies. Other outlines need a new die; we quote the die cost and minimum run before anything is cut.

 

What tolerance do you hold?

Diameter ± 0.5 mm, thickness ± 0.3 mm, both two-way. These are the numbers the selection table was built against.

 

What is the MOQ?

500 pcs custom, 200 pcs unprinted. At 57 g per piece, 500 pcs is about 28.5 kg before packing - a courier-sized trial order.

 

How much does a coaster cost?

US$0.15–0.85 per piece. Three inputs decide where you land: how wide, how many, and how the logo goes on - the bands are in the price section above. Send the cup base, the quantity and the logo method, and the quote comes back as a figure for your build, not a "from" price.

 

Sample cost, freight and lead times?

Samples are free; you cover the courier, dispatched in 3–5 days. Bulk runs 14–20 working days after sample approval.

 

Will the peak season delay my order?

September to December is the gift-program peak. A slot is held only against a deposit and an approved sample.

 

Will these warp?

Any two-layer laminate moves if one face takes up water and the other does not. We measure flatness across the diameter with a straightedge and a feeler gauge, record the reading and the gauge position for every batch, and that record goes out with the quotation if you ask. An 8 mm core is specified instead of the 3–4 mm board used on printed coasters for exactly this reason. Store them flat and dry, never soak them, and run the rock test on the sample before you commit.

 

Can they go in the dishwasher?

No. The wood-based core swells in standing water and the bond is not rated for that temperature cycle. Wipe with a damp cloth and dry flat.

 

What happens if a batch has defects?

Report within 30 days of receipt with photographs and the carton label. We replace or credit the affected quantity. Below a 1% threshold nothing is shipped back.

 

Do you have CE certification?

No, and the previous version of this page should not have claimed it. CE marking follows specific EU directives, and a cork tabletop coaster falls under none of them. If your specification sheet asks for CE, tell us and we will send what does apply: our ISO 9001:2015 and ISO 14001:2015 certificates with their numbers and validity dates, plus the material declarations your broker needs. Certificate numbers travel with the quotation, not with the page.

 

Is the surface absorbent or stain-resistant?

Absorbent. The face is raw cork with no lacquer, so it takes up condensation and it will mark if wine or coffee is left standing on it. If you need a wipe-clean face, this is the wrong product: tell us and we will quote the printed MDF version, or say plainly that we do not make what you need.

 

 

 

 

 

 

 

Hot Tags: Cork Faced MDF Coasters — Cork Top, Wood Core, Made to Your Drawing, China Cork Faced MDF Coasters — Cork Top, Wood Core, Made to Your Drawing manufacturers, suppliers, factory, Cork Mat Size, Coffee Cork Coaster, Cork Pad, Cork Coasters Round, Coaster Round Cork, Natural Cork Coasters

Send Inquiry