Cork Cup Coasters — Cut to Ø90–145 mm, 5 to 10 mm Thick
Product: agglomerated cork cup coasters.
Use: for cafés and bars.
Other buyers: hotels and branded giveaways buy the same piece.
Packaging: packed differently for hotels and branded giveaways.
Shapes: round, square, or a custom die-cut shape.
Logo options: laser or heat-transfer logo.
Stock sizes: ship from 100 pcs.
Custom die: starts at 1,000 pcs.
Diameter range: Ø90–145 mm.
Thickness options: 5 / 6 / 10 mm.
MOQ: 100 pcs.
Sample lead time: 5–7 days.
Specification repeat: 21–23 g at Ø95×6 mm.
Description
Technical Parameters

Six lines. If you still have a question after these, the spec table is the long version.
| Material | Agglomerated cork granulate. No synthetic cork, no MDF core, no rubber core. |
| Diameter | Ø90 / 95 / 100 / 107 / 120 / 131–145 mm · Square 90×90 / 100×100 / 120×120 mm |
| Tolerance | Ø ±1.0 mm · thickness ±0.5 mm |
| Logo | Laser engraving, heat transfer, or debossing. Limits per method below. |
| MOQ | 100 pcs on stock sizes · 1,000 pcs on a custom die |
| Lead time | Sample 5–7 days · Bulk 12–18 days |
Technical specifications
| Material | Agglomerated cork granulate, bound with a plant-based resin. It is cork and binder, nothing else - no synthetic cork granulate, no plastic filler. |
| Density | 500–550 kg/m³ |
| Diameter, round | Ø90 / 95 / 100 / 107 / 120 / 131–145 mm |
| Size, square | 90×90 / 100×100 / 120×120 mm |
| Thickness | 5 / 6 / 10 mm (custom 3–15 mm) |
| Tolerance | Ø ±1.0 mm · thickness ±0.5 mm · square ±1.0 mm |
| Piece weight | Ø95×6 mm = 21–23 g · Ø120×10 mm = 57–62 g |
| Edge | Die-cut and deburred, then tumbled. No loose granulate on the rim. |
| Surface | Natural, unsealed both sides (default) · water-based lacquer one side (on request) |
| Logo methods | Laser engraving · heat transfer · debossing |
| MOQ | Stock 100 pcs · custom die-cut shape 1,000 pcs |
| Sample lead time | 5–7 days. Sample free, freight collect. |
| Bulk lead time | 12–18 days. Rush 7–10 days with capacity locked at deposit. |
| Monthly capacity | 500,000 pcs per month on the coaster line |
| Packing | Quoted per order. Carton count, carton size and gross weight depend on how you sell it - a retail 4-pack and a café bulk carton are not the same box. |
| HS code | 4503.90 - cork articles. Confirm with your broker. |
| FOB | Ningbo / Qingdao |
| Food contact | Report on request. We send the FDA 21 CFR 175.300 or LFGB document only for the market you sell into, and only for batches that were actually tested. Ask before you order, not after. |
A note on CE. Cork coasters do not fall under any CE directive, and we do not claim CE for them. If your spec sheet asks for CE, what you actually need is the food-contact document - ask us for the FDA or LFGB report and we will send whichever applies to your market.
A note on "100% natural". These are pressed cork, not sliced cork bark. The granulate is 100% cork; the 1–5% binder is what holds it together. Anyone selling you an agglomerated coaster as "100% natural, no adhesive" is describing a product that does not exist. If you need a genuinely additive-free piece, that is sliced cork sheet - a different product at a different price, and we will tell you when it is the wrong choice.
Your cup, our coaster: coaster Ø ≥ cup base Ø + 20 mm
Measure across the flat bottom of the cup, not the widest point of the body. Ten millimetres of cork on each side is what keeps condensation on the cork. Without it, water runs down the glass and onto the table.
The +20 mm already has the Ø ±1.0 mm taken out of it, which is why the ranges below stop where they do. A Ø95 mm coaster measures 94 mm at worst, and 94 − 20 = 74 mm of cup base, not 75.
| Your cup base | Order this | Why |
|---|---|---|
| up to 69 mm espresso, small tea cup |
Ø90 mm, 5 mm | 10 mm per side at worst-case Ø89 |
| 70–74 mm standard mug |
Ø95 mm, 6 mm | 10 mm per side at worst-case Ø94; 6 mm separates a 90 °C base from the table |
| 75–79 mm large mug |
Ø100 mm, 6 mm | 10 mm per side at worst-case Ø99 |
| 80–86 mm pint glass |
Ø107 mm, 6 mm | 10 mm per side at worst-case Ø106; tilt clearance in bar use |
| 87–99 mm beer stein, soup bowl |
Ø120 mm, 10 mm | high centre of gravity; 10 mm resists tipping |
| 100–124 mm carafe, serving dish |
Ø131–145 mm, 10 mm | trivet territory - see the trivet page |
| Coaster that covers the cup mouth | Cup outer Ø + 2 mm | must be larger than the rim, never smaller |
| Anything else | Send a drawing or one sample - we confirm the size before sampling. No charge. | |
If your cup is not on this list, send the base diameter and we will tell you which of the six sizes fits - usually the same day.
Which cork for which job
| Type | Best for | Cost | What to know |
|---|---|---|---|
| Agglomerated cork this page |
Coasters, high volume, custom shapes | Low | Absorbs condensation, quiet, dimensionally stable. The edge can crumble if it is not deburred - ask us for the deburr spec. |
| Cork + MDF backing | Retail sets, full-bleed printing | Low–mid | Do not soak it. The cut edge wicks water and the layers separate. Buy this for looks, not for a wet bar. |
| Cork + rubber | Bars, heavy glassware, outdoor | Mid | Grippiest and most chip-resistant. Heavier, and the rubber edge shows a dark line. Not a food-contact surface. |
| Sliced cork sheet | Trivets, natural-tone decor | High |
Genuinely binder-free, visible grain. Not flat enough for ±1 mm at 5 mm thickness - do not specify it for coasters. |
Four logo methods, and what each one cannot do
Laser engraving
Burns the logo into the cork. Colour comes from the burn, so it is always a shade of brown - no white, no Pantone match.
Min line 0.4 mm. Tone varies ±10% piece to piece because density varies piece to piece. That variation is the material, not a defect.
01
Heat transfer
Full colour, up to 4 spot colours. Sits on the surface, so it wears at the edges first.
Min line 0.5 mm. In a wet bar expect visible edge wear after 6–12 months of daily use. It is the only method that holds thin white type on a dark field - laser will not.
02
Screen printing
Good on flat square coasters, poor across a die-cut round edge. Cork absorbs ink unevenly.
Solid colour fields need a white base coat, which adds a step and 3–5 days.
03
Debossing
Pressed-in logo, no ink, no colour. Excellent for a subtle mark.
Text under 5 pt fills in and becomes unreadable. We will tell you before we run it.
04
Six things that actually go wrong with a cork coaster
Each one has a physical cause, and each one has something you can check before you pay a deposit.
"It was flat when we unpacked it."
Warehouse manager, six weeks later
1. The box arrives flat. Two weeks later, it has a crown.
A coaster that curves means the glass rocks. On a polished conference table, a rocking glass of red wine is a claim, not an inconvenience.
Pressed cork is hygroscopic. Two faces that absorb at different rates swell at different rates, and the piece bends toward the drier side. This is why a coaster lacquered on one face and raw on the other will curl in a humid warehouse - the raw face takes water from the air and from the table, and the sealed face does not.
We press at 500–550 kg/m³ and cure 24 hours at controlled humidity before packing, so the piece leaves us dry and at equilibrium. Where a customer asks for one-side lacquer, we say what it does: it resists a spill and it curls faster. Both sides raw or both sides sealed are the two stable options.
Two things to ask for. The pressing and curing record for your batch, which we keep 12 months. And a 30-second dunk test on your side: soak one coaster, leave it on a counter for two days. Flat means the cure was real.
"Housekeeping wiped the rim and the cloth went grey."
2. Wipe it once with your thumb, and your fingertip comes away grey.
A steel die shears cork granulate. It does not slice it. The cut edge keeps a fringe of half-attached granules, they work loose in the carton, and they end up on the guest's fingers and on the tablecloth.
Every piece we cut goes through a deburring pass on the cut edge and a tumble cycle after it. The drum setting is chosen per die, not per product - a printed number would be wrong for your shape - so we send the setting we run on your size together with the sample. It costs us seconds per piece and it is the difference between a coaster that feels finished and one that feels like a cut-off.
A macro photo of the edge at 10× is the whole test. A supplier who cannot produce one has no deburr step. Then wipe the rim of a carton piece with a tissue. If the tissue greys, no downstream step fixes it.
"We thought it was cheap ink."
3. The logo rubs off - and it is not the ink
First assumption is bad ink. We assumed the same thing the first time a customer sent a photo back. It is not the ink. It is the void fraction.
Cork is roughly 50% air by volume. Ink printed onto it bridges the pores and sits on the surface. The film is held by adhesion to a surface that is half holes. Abrasion plus moisture lifts the bridge, and the logo comes away in flakes. It does not fade gradually.
This is why we steer logo-bearing orders toward laser engraving even though heat transfer photographs better: engraving cuts material away. There is nothing sitting on the surface to lift. If the artwork needs colour, use heat transfer - and specify a piece that will not be scrubbed.
Get a sample with your logo on it and rub that logo with a wet thumb 50 strokes. Do it before you approve the bulk order. We send the sample. The rubbing is yours.
"It went straight through and left a ring."
4. Three millimetres.
A 3 mm coaster is a coaster. It is also a coaster that is saturated in about the time it takes to finish a cold drink.
Absorption is not the problem - absorption is the product working. The problem is what happens after saturation: once the cork is full, water passes through, and a saturated 3 mm disc transmits to the table faster than a 6 mm one. On varnished oak in a café, that is a white ring by lunchtime, and rings do not come out.
Our default for cold drinks is 5 mm, 6 mm for anything served in a pint glass, 10 mm for steins. Same for carafes and soup bowls. If you are specifying 3 mm to save freight, know what you are buying: a coaster for a dry table.
Weigh one. Ø95×6 mm should read 21–23 g. Grams over 42.5 cm³ gives you density. A 3 mm piece that weighs like a 6 mm piece is not 3 mm.
"The reorder doesn't match the first batch."
Heard more than once
5. Same drawing, two batches, half a millimetre apart
It is almost never the material. A steel die cutting 100,000 pieces opens up as the edge wears. By the end of a die's life the cut is 0.5–1.0 mm wider than on the first strike. Reorder six months later on a fresh die, and both batches are "Ø95 mm" and both wrong by half a millimetre in opposite directions. Stack them and the difference is visible.
We hold Ø ±1.0 mm, and we retire a die on a strike count. That count is written on the QC sheet that ships with your carton. Every batch is first-article measured against the approved sample, and the measurement goes on the same sheet.
The first-article sheet from the last three batches of your size answers most of it. Numbers identical to two decimals across three batches were copied, not measured. Then ask for the die count and the replacement interval. A supplier who cannot answer does not track either.
"They said it was antimicrobial."
6. Cork moulds. It is not an antimicrobial material.
We are not going to tell you otherwise, and you should discount any supplier who does.
Cork is cellulose. Cellulose plus moisture plus no airflow equals mould - in a cellar, in a closed box, in a bar that wipes tables down at midnight and stacks the coasters wet. Cork's natural suberin slows it down. It does not stop it.
What we can do is design for the drying path: unsealed surfaces on both faces so moisture leaves as fast as it enters, and 5 mm minimum so a piece is not saturated by one round of drinks. What we cannot do is make a coaster that tolerates being stacked wet.
Nothing to check here. This is the one item on the page where the honest answer is a limit, and no testing gets past it. If your venue stacks coasters wet overnight, say so before we quote. The right product is probably cork + rubber, and it costs more.
Where these go, and what each channel actually orders
Cafés and coffee chains - Ø95×6 mm with a laser-engraved mark. A single outlet burns through 150–250 pieces a year, mostly breakage and loss, so order by the carton. · Ø95×6, laser
Bars and taprooms - Ø107×6 mm. Highest loss rate of any channel; budget a reorder every 6–9 months. Heat transfer if the logo has colour, and accept the edge wear. · Ø107×6, heat transfer
Hotel guest rooms - Ø90×5 mm, unsealed, no logo. It goes into a drawer and gets stacked wet; unsealed cork survives that better than lacquered cork. · Ø90×5, natural
Branded giveaways - Ø95×6 mm, heat transfer, packed in a printed sleeve. MOQ 1,000 for a custom sleeve. · Ø95×6, sleeve
Retail 4-packs - Ø100×6 mm, debossed logo, kraft box with a window. Sold as a set, so thickness consistency inside the box matters more than absolute thickness. · Ø100×6, deboss
From drawing to first article: 12–18 days
You send a drawing, a photo or one sample - plus the cup base diameter. Day 0.
We confirm size, thickness, edge and logo method in writing. Same day.
Sample in 5–7 days, free, freight collect. You approve it against the numbers, not against the photo.
Deposit locks the die and the line. Rush orders are only possible at this point, not before.
Bulk run 12–18 days. First-article measured, deburred, tumbled, packed.
Inspection before the carton closes - AQL 2.5, and your inspector is welcome.
Ship from Ningbo or Qingdao.
Packing spec, carton size and HS code come with the quotation for your order - the same product ships in 7 different carton configurations depending on how you sell it, so we do not publish one.
The plant behind this
Xi'an Tianlei Rubber Technology, established 2007, 22,000 m² in Xi'an, Shaanxi. 15 production lines across cork, rubber and cork-rubber composites. Cork products go to 40+ countries.
We started in rubber and moved into cork because the pressing equipment overlaps. That is worth knowing when you compare us to a pure cork trader: we press our own granulate, which is why a density figure is something we can answer and a trader usually cannot.
2007Established
22,000 m²Plant
15Production lines
40+Countries
Certificates: ISO 9001:2015 and IATF 16949:2016, plus an environmental management system certificate. Numbers and PDFs on request - we send the current versions with expiry dates, not the expired ones that look better.
Questions buyers actually ask
My cup is 70 mm across the bottom. Which one?
Ø95 mm. The rule is coaster Ø ≥ cup base + 20 mm, and the 20 mm already accounts for the Ø tolerance - so 70 mm to 74 mm of cup base lands on Ø95.
Can I get a shape that is not round or square?
Yes, on a custom die. MOQ 1,000 pcs, and the die is a one-off cost quoted with the order. Send a vector file or a physical sample - a JPG of a logo is not a shape.
Will the coaster be exactly 6 mm?
No, and no supplier will give you exactly 6 mm. We hold ±0.5 mm. On a stack of ten that is a 5 mm spread across the stack - which is why we say it up front.
What is the real MOQ?
100 pcs on stock sizes, 1,000 pcs on a custom die. Below 100 pcs we can only ship from stock, and stock is not always available.
What does it cost?
The number moves with thickness more than with diameter, because cork is bought by volume. A Ø120×10 mm piece is 3.2× the material of a Ø95×5 mm piece - 113 cm³ against 35 cm³, and you can check that with the two diameters and a calculator. Give us the size and the quantity and you get a price the same day; we do not publish a starting price because a starting price is always for a size you do not want.
Can you mix sizes in one order?
Yes, above 500 pcs total. Below that the setup cost per size makes the unit price worse than ordering one size.
Sample in how many days?
5–7 days for a stock size with a laser logo. Add 3–5 days for a new die.
What happens around Chinese New Year?
The line stops for the Spring Festival break. Orders that have to land before a given month need the deposit before the factory closes, and the dates move with the lunar calendar, so we confirm them with your quotation. You will hear this at quotation stage. Month three is too late for either of us.
Can you ship to an Amazon FBA warehouse?
Yes. FBA prep - labelling and carton marking - is quoted separately.
A batch arrives with defects. What happens?
There is a claim window and a defect threshold, both written into the quotation before you order - not agreed verbally after the fact. Inside the window and over the threshold, we remake the batch and you do not ship the defective carton back. Ask for those two lines with the price; they are the same two lines for every customer, which is why they can be printed.
Do you have CE?
No, and cork coasters do not need it. We will send the food-contact report instead - that is the document your compliance team actually wants.
Can I see a factory audit report?
We are not BSCI- or Sedex-audited, and we do not claim to be. What we can do is host a video audit or a customer visit: pick a date, and we walk you through the pressing line, the deburr station and the packing bench on camera. Some buyers find that more useful than a 2-page audit summary.
Hot Tags: Cork Cup Coasters — Cut to Ø90–145 mm, 5 to 10 mm Thick, China Cork Cup Coasters — Cut to Ø90–145 mm, 5 to 10 mm Thick manufacturers, suppliers, factory, Cork For Coasters, Cork Coaster With Holder, Cork Table Mats, Modern Cork Placemats, Natural Cork Placemats, Cork Coasters Round
Previous
personalized cork coastersNext
Coffee Cork CoasterSend Inquiry











