Custom Wooden Top Cork Stopper | Beech, Bamboo & Pine Caps, Ø18.5–24mm, 1,000 pcs MOQ
Available diameters: Ø18.5–24 mm.
Dimensional tolerance: ±0.5 mm.
Laser engraving and hot foil customization available.
Minimum order quantity: 1,000 pcs.
Sample lead time: 5–7 days.
Monthly production capacity: 500,000 pcs.
Description
Technical Parameters
Wooden Top Cork Stoppers - Custom Size, Logo, and Finish
Half cork, half hardwood. One stopper.
Spirits buyers want it heavy in the hand. Fragrance buyers want it to leave no dust. Same product, two different demands - and the difference sits in the cap material and the surface finish.
1,000 pcs minimum. Same price whether you put a logo on it or not.
Spec chips: Ø 18.5–24 mm | MOQ 1,000 pcs · logo included | Sample in 5–7 days
Trust bar: Since 2007 · 22,000 m² plant · 500,000 pcs/month · 40+ countries · ISO 9001
CTA: Quote in 24 hours (scrolls to form on this page) | Ask on WhatsApp
Bottle bore + quantity. Two numbers is all we need. You get sizing advice and price the same day.

At a Glance
Six numbers. Enough to tell whether this stopper fits your bottle and your cost.
|
Body material |
Natural cork / agglomerated cork |
|
Diameter |
Ø18.5–24 mm, tolerance ±0.5 mm |
|
Cap material |
Beech / pine / bamboo / cork |
|
Logo method |
Laser engraving / hot foil / silk screen |
|
MOQ |
1,000 pcs - same 1,000 pcs with a custom logo |
|
Lead time |
Sample 5–7 days · Bulk 14–20 days |
Technical Specifications
|
Parameter |
Value |
|
Body material |
Natural whole-cork / agglomerated / technical cork |
|
Cap material |
Beech, pine, bamboo, natural cork, or TPR cap |
|
Diameter (Ø) |
18.5 / 19 / 20 / 21.5 / 22 / 23 / 24 mm - other sizes to your drawing |
|
Length |
25 / 30 / 35 / 38 / 44 mm - other sizes to your drawing |
|
Tolerance |
Ø ±0.5 mm · length ±0.5 mm |
|
Surface finish |
Polished, waxed, coated, or natural |
|
Logo method |
Laser engraving, hot foil, silk screen |
|
MOQ |
1,000 pcs - same with or without logo |
|
Sample lead time |
5–7 days |
|
Bulk lead time |
Stock sizes 14–20 days · custom 20–30 days |
|
Monthly capacity |
500,000 pcs |
Which Diameter Fits Your Bottle
First question: where did you measure?
The top edge of the bore. Not the middle. The middle reads wide, your sizing goes one size off, and that error is invisible on a drawing.
Cork seals by compression. 3–4% is right. Tighter and the stopper splits, and the consumer can't pull it out anyway. Looser and it starts weeping in transit.
The table below maps common bore diameters to shipping sizes. If your number isn't in it, send the drawing - we confirm before sampling, not after the run.
|
Bottle bore |
Suggested stopper Ø |
Compression |
|
18.0–18.5 mm |
Ø19 mm |
approx. 2.6% |
|
18.5–19.0 mm |
Ø19.5–20 mm |
2.5–3.2% |
|
19.0–19.5 mm |
Ø20–20.5 mm |
2.5–3.1% |
|
21.5–22.0 mm |
Ø22.5–23 mm |
2.2–3.0% |
|
23.5–24.0 mm |
Ø24–24.5 mm |
2.0–2.9% |
|
Other |
Send a drawing or one empty bottle - we confirm sizing before sampling. |
Compression = (stopper Ø − bore Ø) ÷ stopper Ø. Figures assume a polished natural cork body. Technical cork feels harder - same formula, different hand feel.
Four Cork Bodies, and When Each One Applies
Most buyers open with "natural cork." Then the quote comes back, the sample arrives, and it doesn't match the shelf.
So - all four, laid out.
|
Type |
Best for |
Seal |
Cost |
What to know |
|
Natural whole cork |
Premium spirits, long bottle aging |
Best oxygen transmission |
Highest |
Visible grain; sensory screening every lot |
|
Agglomerated cork |
Volume wine, olive oil |
Even |
Mid |
Most dimensionally stable of the four |
|
Technical cork |
Mid-range wine |
Balanced |
Mid |
Washed surface neutralizes; lower taint risk |
|
TPR / synthetic cap |
Bar spirits, high-volume filling |
Very good |
Low |
No natural grain - color matched to your Pantone |

Beech, Pine, Bamboo, or Cork Cap - What Actually Differs
Beech - the default. Dense, holds laser detail, takes color evenly. Heavier than pine, and premium spirits buyers are paying for exactly that weight.
Pine - lighter, cheaper. Coarse grain, so small logos and fine type blur. Solid color blocks work. Detail doesn't.
Bamboo - the strongest sustainability story, and that side node line is instantly recognizable. The trade-off: every piece has a different grain direction, so lot-to-lot color variation runs wider than beech.
Natural cork cap - one material for the whole stopper. Some European brands specify it purely to talk about recycling. Cork on cork, and the mixed-material problem disappears.

Logo Methods: What Each One Actually Looks Like
Three methods, three results. Choose by artwork, not by price. If the method can't hold your logo, the rework costs more than the tooling.
Laser engraving - burned into the wood. Permanent, no ink, holds line art and type down to about 2 mm. Reads darker on beech, lighter on pine.
(Vector artwork required. No gradients.)
Hot foil - gold or silver foil pressed onto the surface. The classic premium spirits look, with crisp edges on solid shapes.
(Wears with repeated handling. Cost climbs with foil area.)
Silk screen - flat color, even coverage. Good for solid marks, poor for fine lines.
(Large solid areas are safe. Fine lines - switch to laser.)
Send AI, EPS, or PDF. Before the bulk run, we photograph the actual engraved piece and send it to you.
Six Problems Cork Stoppers Actually Have
Six. All of them asked by real buyers, not FAQ we invented.
Not one of them gets solved by the words "good quality."
1. Will it leak?
A stopper goes into a bore. Looks right. Passes visual inspection.
Then it gets on a container, and twenty days later it's weeping in a warehouse.
The problem was never the cork. It was the diameter.
Ø19 mm into an 18.5 mm bore - 2.6% compression. Enough. The same stopper into a 19.5 mm bore - zero compression. A zero-compression stopper still goes in. Sits flush. Passes the same inspection. It just doesn't hold.
So we ask two numbers before quoting: bore diameter, fill height. Send the drawing, or mail us one empty bottle.
If your bore tolerance band runs wide, we'll tell you to go one size up. We won't tell you it should be fine.
2. Crumbs and dust
Open the bag. A layer of cork dust across the bottle shoulder.
That dust goes into the bottle, and the bottle is finished.
Blunt cutting die, or the body dried out after cutting. Two causes, one result.
Every piece gets polished after cutting, then a wax pass. Dies get changed on schedule - not when they start tearing, because by then a batch has already shipped.
Hand inspection, piece by piece, before packing. 5 stations, roughly 6,000 pcs per station per day. Chipped edges and loose granules come out and go back to regrind. Not one of them ships.
3. Cap cracking and glue failure
The summer batch. 5% of the caps lifted.
First thought was the glue - that's what we assumed too. No. Moisture content.
Wood moves. Cork doesn't. Glue those two together and the joint is a failure point by design - and it waits until the container has crossed a few climate zones before it lets go. You find out on arrival.
Beech comes in at 12–15% moisture and has to come down to the process window before it meets the body. We dry it in a climate-controlled room. Not on the yard. And we measure again at pressing.
Food-grade PU adhesive, cured under pressure. Hand-applied glue is not something we do - it goes on uneven, and there's no telling which piece didn't take.
4. Odor and TCA
A few nanograms per liter.
What that number means: you can't smell it, you can't test for it, and the wine is gone. It reads as wet cardboard.
Nobody inspects for this piece by piece. The job can't be done that way.
What can be controlled sits upstream - bark from a fixed growing region we've worked with for years, boiled and washed before granulation, stored away from anything chlorinated. Incoming lots get sensory screening. An obvious off-lot goes back whole, none of it ships.
If your product is white spirit or a pale oil, nothing hides. Go technical cork.
It costs more. It's the right answer.
5. Lot-to-lot color and dimension drift
"The reorder doesn't match the first batch."
We've heard that sentence a lot.
Natural cork varies. That's the material, not a defect. Three different colors arriving in one shipment is something else - that's a process problem.
We cut our own tooling and our own toolmakers maintain it. Diameter drift traces back to blunt dies, so die strokes are logged per tool, and dies get changed on schedule instead of after a complaint.
First-piece measurement signed every run. Then AQL sampling across the batch.
Color is graded at packing. If you need 50,000 pcs in a single shade, say so at sample stage - after production starts it becomes a sorting operation, and sorting is charged separately.
How to check us: first-piece measurement records are photographed and archived. Emailed to you before packing.
6. Peak-season shipping
"Everyone's slow in August."
True. European filling lines restart in August and September, and every cork supplier slows at the same time. Not just us.
15 lines. Roughly 500,000 pcs a month. Not unlimited.
What we can control is the queue: orders confirmed before peak season get capacity locked, existing customers keep last year's slot, raw cork is stocked ahead so bulk doesn't sit waiting on material.
Your launch date doesn't move.
So give us the date first. We'll tell you before you order whether the slot holds - not after.
How to check us: ask for the current production schedule. It lists confirmed orders and open capacity by week.
Where These Stoppers Go
Same body, different bore, different finish. Tell us the bottle and we'll set the combination.
Wine and spirits - 750 ml glass, bar-top and T-cork. Beech cap, laser or hot foil logo. Typically Ø19–22 mm
Olive oil and vinegar - 250–500 ml bottles. Tapered body, goes in clean, pulls out clean. Typically Ø19–22 mm
Essential oils and fragrance - 30–100 ml. Small diameter, tight tolerance, and no dust on the wick. Typically Ø18.5–20 mm
Candles and glass jars - 200–400 ml jars. Flat or dome lid, often with top-surface printing. Typically Ø21.5–24 mm

From Drawing to First Sample, Seven Days
Send the drawing, or mail a bottle - bore diameter, fill height, target quantity, logo file.
We set the size - 1–2 days. Suggested diameter and compression confirmed in writing.
Sampling - 5–7 days. Photo of the physical sample before it ships.
You approve, arrange payment - 100% T/T before shipment.
Bulk production - 14–20 days, 20–30 days for custom. First-piece record sent before packing.
Packaging method, carton specs, HS code, and certification documents are quoted per order and sent with the price.
On the Floor
All of the above assumes there's actually a plant behind it.
Xi'an. 22,000 m². Running since 2007.
2007 · Established | 22,000 m² · Plant area | 500,000 · Monthly output (pcs) | 40+ · Export countries
What Buyers Say
[sample] "We were on an Italian supplier and August lead times kept slipping, that's why we switched. Tianlei holds the May slot we booked. The stoppers aren't cheap - reliable is." - Packaging Manager, wine producer (anonymous) · 120,000 pcs/year
[sample] "They pushed back on our first drawing. The bore tolerance we specified would have leaked at 40°C. They were right." - Product Development, spirits brand (anonymous) · 60,000 pcs/year
FAQ
Sizing and fit
What stopper size for an 18.5 mm bore? Ø19 mm, about 2.6% compression, matched to a polished natural cork body. On the wide side of the tolerance band, we'd suggest Ø19.5 mm. Send the drawing and we confirm in writing before sampling.
Can you match an existing bottle? Yes. Give us bore diameter, bore height, and fill height on the drawing - or just mail one empty bottle. We measure it, set the diameter, and sample to that size. Sizing takes 1–2 days.
What's the tolerance? Ø ±0.5 mm and length ±0.5 mm as standard. Tighter is possible, but it slows production and raises unit price - give us the number you actually need, not the tightest number that looks good on paper.
Material
Natural, agglomerated, or technical cork - which one? Match to shelf life and price band. Premium spirits, long aging: natural whole cork. Volume wine and olive oil: agglomerated. Mid-range wine with taint concerns: technical cork, washed surface. Bar spirits at volume: TPR cap. Tell us the product and the target retail price and we'll give you one recommendation, not a list of four.
How do you control TCA and odor? Upstream, not by finished-goods testing: fixed-region bark, boiled and washed before granulation, stored away from chlorinated material, sensory screening on every incoming lot, and an obvious off-lot rejected whole. For taint-sensitive products we recommend technical cork outright.
Customization and MOQ
What's the MOQ, and does a logo change it? 1,000 pcs - with or without a logo, same number. Below-MOQ sample orders are fine, quoted separately.
Can you engrave our logo on the wooden top? Yes - laser engraving, hot foil, silk screen. Send AI, EPS, or PDF vector files. Laser holds lines down to about 2 mm; gradients and photos won't work. Before production is confirmed, we photograph the actual engraved sample and send it over.
Can one order mix several sizes? Yes, but each size has to meet MOQ on its own. Mixed sizes are packed separately and labeled by size. If you need mixed pallets, say so at quoting stage and we'll plan cartons around it.
Lead time
How long is sampling, and who pays freight? 5–7 days. Stock-size samples are free, freight collect, and that freight is credited against your first bulk order. Custom tooling is quoted separately.
What's the bulk lead time in peak season? 14–20 days for stock sizes, 20–30 days with a custom logo or wooden top, counted from order confirmation. August and September typically add a week; orders confirmed ahead of peak season can lock capacity. We'll tell you which band you're in before you order.
Quality and after-sales
What happens if a batch has defects? Send photos and carton numbers within [30] days of arrival. For dimensional issues or glue failure, we make up the quantity free in your next shipment or deduct it from the invoice - your call. Under [5%] of the order, the defective pieces don't come back.
Hot Tags: Custom Wooden Top Cork Stopper | Beech, Bamboo & Pine Caps, Ø18.5–24mm, 1,000 pcs MOQ, China Custom Wooden Top Cork Stopper | Beech, Bamboo & Pine Caps, Ø18.5–24mm, 1,000 pcs MOQ manufacturers, suppliers, factory, Bag Cork Natural, Natural Cork Handbags, Cork Ball Lid Jar, Wooden Cap Cork, Cork Coasters Square, Candle Cork
Previous
Wood StoppersSend Inquiry













