< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=2295438394593633&ev=PageView&noscript=1" />
Dark Cork Coasters, Made to Your Diameter, Thickness and Logo

Dark Cork Coasters, Made to Your Diameter, Thickness and Logo

Product: Dark carbonized cork coasters.
Customization: Cut to the diameter and thickness you request, with branding by laser or print.
Main customers/uses: Most output goes to brewery taprooms, boutique hotels, coffee chains, and the promotional trade.
Standard size: 100 mm is the stock size.
Custom size range: Anything from 60 to 200 mm can be cut to your drawing.
Thickness range: 6–10 mm.
Specification highlights: ⌀ 100 mm standard; 6–10 mm thick; die-cut from 2,000 pcs.
Sample lead time: 3–7 days.
Established: 2007.
Plant area: 22,000 m².
Monthly capacity: 500,000 pcs/month.
Export countries: 40+.
Production lines: 15+.
Quotation time: Quote in 24 hours.
Call to action: Ask by email.
Send Inquiry

Description

Technical Parameters

Dark carbonized cork coaster, 100 mm diameter, 8 mm thick, on a warm gray studio background

Six lines, ten seconds, everything a buyer checks before sending an email

Material Natural cork agglomerate (Quercus suber), dark carbonized grade
Diameter 100 mm standard, 60–200 mm to drawing, tolerance ±5 mm
Thickness 6–10 mm, tolerance ±2 mm
Logo method Laser engraving · CMYK print · silkscreen · deboss
MOQ 2,000 pcs for a custom die-cut shape · blank and printed minimums confirmed per order
Lead time Sample 3–7 days · Bulk 30 days

Technical specifications

Material Natural cork agglomerate (Quercus suber), dark carbonized grade
Colour origin Kiln carbonized - the tone runs through the full thickness, not a surface stain
Diameter (standard) 100 mm
Diameter (range) 60–200 mm
Thickness 6–10 mm, to your specification
Tolerance ⌀ ±5 mm · thickness ±2 mm
Shape Round · square · hexagon · oval · custom die-cut
Edge Square cut standard · rounded edge (round-over) on request
Surface Fine sanded, unsealed · sealed on request
Logo method Laser engraving · CMYK print · silkscreen · deboss
MOQ 2,000 pcs for a custom die-cut shape. Blank and printed quantities are confirmed per order - tell us the quantity and the logo method and we answer with the minimum for that specification.
Sample lead time 3–7 days
Bulk lead time 30 days after sample approval
Capacity 500,000 pcs / month
Payment T/T
Food contact Not held in stock as a fixed report - tell us the market and the standard your specification cites, and we confirm what we can supply before you commit
Not claimed Cork coasters are outside the scope of CE marking. We do not claim CE.

Diameter, thickness, tolerance, MOQ and lead time repeat in the FAQ with the same figures. If two of them ever disagree on this page, say so and we will fix the page. A spec sheet that argues with itself is worth nothing to you. Packing, HS code and certification documents come with the quotation, so those figures match what actually ships.

 

Which size do I need?

 

Measure the base of the glass you serve, not the rim. Ten millimeters of overhang minimum, or the glass looks like it is sliding off the edge. Past 20 mm you are making a placemat.

Your requirement We recommend Why
Glass base up to 70 mm (rocks glass, tumbler) ⌀ 100 mm × 6 mm 15 mm of overhang on each side, and 6 mm is the thinnest body we would put under a full glass
Pint or beer glass, base 70–85 mm ⌀ 100 mm × 8 mm The 100 mm disc is the volume standard for pub supply; the 8 mm body holds a full round of condensation without reaching the table
Wine glass or small decanter ⌀ 120 mm × 8 mm Outside the 100 mm stock, inside the 60–200 mm range. A wide base on a narrow disc reads as a mistake to guests
Commercial dishwashing ⌀ 100 mm × 10 mm, rounded edge Thickest body plus a round-over. The cut edge is where water gets in and where delamination starts
Retail gift set ⌀ 100 mm × 6 mm, set of four Four-stack height fits standard kraft gift boxes without a custom die
Single-colour logo Any diameter On a carbonized face, laser engraving exposes a lighter core - the highest contrast this material gives
Full-colour artwork ⌀ 100 mm × 8 mm, printed over a white base Dark cork needs a white underlayer before four-colour; on a 6 mm body the raised field shows more
Other Send a drawing or one sample - we confirm the spec before sampling. Die-cut shapes, 60–200 mm diameters, 6–10 mm thickness.

Round and square dark cork coasters shown next to a pint glass for scale

Shape options in one frame. The proportions here are illustrative - the sizes that count are in the specification table above.

Material options, including the two we would talk you out of

Cost is a band here, not a price. Unit price moves with diameter, thickness, print method, packing and quantity.

Type Best for Cost · What to know
Natural cork agglomerate, dark carbonized Bars, hotels, branded retail - the default for this page Mid. Colour varies slightly between kiln batches; we sort by batch, we cannot make it perfectly uniform
Natural cork, light tone Full-colour print; laser contrast is weaker Mid. Shows condensation rings sooner than dark cork
Cork + rubber granulate High-traffic venues, outdoor terraces High. No cork grain. Heavier, quieter when a glass lands, and it will not absorb a spill at all - it only blocks it
Cork-faced MDF Rigid shapes, printed board games, signage Low. The core is not cork and not compostable. If your buyer asks for a mono-material product, this fails
Cork + PU backing Non-slip bars, trays, table runners High. The PU layer is the first thing to fail in a dishwasher; keep it out of machine washing

Logo options, and what each one cannot do

Laser engraving

Burns the surface away to expose the lighter cork underneath. On carbonized stock this is the highest-contrast mark the material allows, and it never peels.

The limit: no color, no gradients, nothing thinner than 2 mm. Under that the beam burns the neighbouring line into one smudge.

01

CMYK print / heat transfer

Full color, photographs, fine gradients. This is what we run for brewery and hotel artwork.

Watch for: color cannot sit on a dark base without a white underlayer. On dark cork we print white first, which adds a step and leaves a slightly raised white field.

02

Silkscreen

Dense, opaque, single-hit color. Cheapest per piece once you are past a few thousand.

Before you design around it: four-color is out, and the mark wears. Silkscreen is a spot process, one or two flat inks, no gradients, no photographs. On a coaster wiped nightly with a wet cloth the edge goes in months, not years.

03

Deboss / emboss

No ink at all. The logo is pressed into the cork, so the mark is as durable as the disc it sits on.

The trade-off: fine detail fills in. Hairlines, text under 2 mm, complicated logos.

04

Four decoration methods on dark cork: laser engraving, CMYK print, spot silkscreen, blind deboss

 

Six things that go wrong with cork coasters

"They were flat when they left you."

1. It was flat when it left the factory

A coaster is a slice of a natural material. It leaves the press flat, passes the visual check flat, sits flat in the carton. Then the container crosses the equator. Four weeks later, on top of the pallet in a Rotterdam warehouse, the edges have lifted and the stack rocks.

Blame the cut? No. Blame water. Cork is about half air by volume and keeps trading moisture with whatever air it is sitting in. Cut a disc in a dry Xi'an winter, run it through a humid container, and the two faces take on water at different rates. The face that wins swells. A flat disc curls.

So the sheet gets pressed and equilibrated before it is cut, and the discs sit in the same conditioned room until they are packed. What goes into the carton is already at the moisture level it will meet at the other end. We do not hand out one ceiling for the whole year either. The figure that holds in a dry winter is not the figure that holds in July. Yours gets quoted for your production month and written into the order confirmation.

The check: ask for the moisture record of the batch your discs were cut from. Batch records run 12 months. If your own QC finds a disc above the ceiling, that is a claim, not a conversation.

 

The bag is opened at a trade show.

2. The dust in the bag

You cut the tape on the inner bag, lift out the top coaster, and your fingers come away brown. You wipe them. It happens again on the next one.

That powder is cork. Two places make it. The sanding line, if the last grit is too coarse. The cut edge, if the disc was punched and never dressed. Sounds minor. It is not. A distributor who opens a carton at a trade show and finds dust on his hands does not order twice, and a housekeeper who finds it on a nightstand tells somebody.

Control sits where the powder is made. The last sanding pass is fine enough that granule boundaries close instead of tearing, and the cut edge gets dressed after punching so the die burr does not stay on. Cartons are then drawn off the line and shaken over white paper before sealing. What comes off the paper goes on the inspection sheet, not into memory.

Try it before you buy: shake the sample we send over a sheet of paper. Ten seconds. Or ask for a photo of the white-sheet check from the last shipment at the same size.

 

"The second batch is redder than the first."

3. It is not the dye

Two batches arrive. The second one is visibly redder. First assumption: the dye changed. That was my assumption too, the first time it happened.

There is no dye bath. This cork darkens in a kiln, and a kiln is a large volume of moving hot air. Carbonized cork comes out darker where the load sat near the heat path, lighter where it sat in the cool corner. Two runs, two loadings, two averages a shade apart. Nothing in the recipe changed, and nothing will.

Two honest ways to handle it. Sort by shade after carbonization, hold the lots separately, ship one order from one lot. And say the tolerance out loud before the claim instead of after it: two discs from the same lot will sit on the same table without a visible step. Across lots poured months apart, we promise nothing. Retail sets that get compared side by side on a shelf? Order the season in one lot and store it.

Judge it yourself: three discs, three different lots, side by side in daylight. Not under a shop spotlight. If the difference is fine on your table, it is fine on your customer's.

 

Not a fingernail test. A shift test.

4. Seventy percent alcohol, several times a shift

Seventy percent alcohol. Again and again. Every shift.

That is what a printed coaster actually meets, and it is the part of a quote nobody mentions. A bar does not wipe with a dry cloth. It wipes with sanitizer, over and over, and a logo that survives a fingernail does not necessarily survive a week of that.

Two things decide it. Whether the ink sits on the surface or is fused into it. Whether the cork under it was sealed. Unsealed cork keeps drinking the sanitizer, the ink film lifts from below, and the edge of the mark goes first, which is the part of a wordmark that carries the shape.

For venues that clean hard we quote laser or deboss, not silkscreen, even though silkscreen is cheaper. When a customer insists on color, we seal the face first, then print, and we say where the mark will fail and roughly when. If we have not tested your ink and seal combination, we say that too, instead of guessing.

Ask for the record: the wipe test on the ink and seal combination we are proposing. If your combination has not been run, we will run it before you commit to a quantity. It costs you calendar time, nothing else.

 

"Your coaster scratched the finish on a four-hundred-euro table."

5. The edge, not the cork

We have had that message. It came from a hotel in Germany.

It was never the cork. Cork cannot scratch lacquer. It is the edge. A disc cut on a steel rule die carries a burr on the side the rule exited. Invisible on a bar top. On polished lacquer, with a heavy glass on top and a guest sliding the coaster, call it a fine file. The damage is a ring of scratches exactly where the coaster sat.

The fix is mechanical and cheap, which is why it is annoying how few suppliers do it. Round the edge over. A light round-over takes the burr off without making the coaster look like a poker chip. Every order bound for hospitality or retail gets it. We skip it only when someone wants a hard square edge for the stacked look.

Ten seconds, no lab: take a coaster from the sample, turn it edge-down on dark paper, drag it. A grey line means the edge was not dressed.

Macro comparison of a rounded cork coaster edge and a sharp square-cut edge with a burr

Left: rounded over. Right: straight off the rule die, burr still on.

Fixed dates do not negotiate.

6. The opening date does not move

A hotel opens on a date announced a year earlier. A taproom opens the week the license clears. A trade show has a floor plan and a booth number. None of those dates care about a production schedule.

What we control is the front of the schedule, not the ocean. Sampling runs 3 to 7 days, and that is where customers lose the most time, usually because the artwork is not usable and the file makes three trips before anyone notices. Send vector on day one and the sample ships inside a week. Bulk is 30 days from approval. That figure does not shrink because your date is tight.

For orders that must land before a fixed date, confirmation has to reach us six weeks before the goods leave the factory. Thirty days of production plus two weeks of buffer we will not compress. Inside that window we can hold capacity for you. After it, we still take the order, we just do not promise the date.

Do this first: give us the landing date before you give us the quantity. We answer with the day the goods must leave the factory and whether that day is reachable. If it is not, you hear it in the first email, not the fourth.

 

Where these are used

 

Brewery taprooms - Ø 100 mm × 8 mm, laser-engraved logo, square edge. Dark cork matches dark bar tops and hides condensation rings between wipes.

Boutique hotels - Ø 100 mm × 6 mm, debossed mark, sealed face. A quiet mark reads as considered, not promotional.

Coffee chains - Ø 100 mm × 6 mm, spot-color silkscreen, high volume. Flat ink only. If your brand runs on gradients, you hear that before you design around it.

Promotional distributors - Ø 100 mm × 6 mm, CMYK over a white base, four-piece gift set. Twenty-plus designs a season is normal here.

Retail gift and homeware - Ø 120 mm × 8 mm, rounded edge, kraft gift box. Sellable without repackaging.

Pint of stout on a dark cork coaster on a brewery taproom bar top

Four dark cork coasters in a kraft gift box with a fanned set beside it

From drawing to shipment

You send a drawing, a sample or a spec. One working day later you know whether it is makeable and roughly what it costs.

Quote. Unit price, MOQ break, tooling if a die is needed, transit to your port. Two working days.

Sample. 3 to 7 days from artwork approval. Blanks are free, you pay the courier.

Confirmation and deposit. T/T. The line is booked the day the deposit lands, not the day we quote.

Bulk. 30 days. Mid-run photos on request.

Inspection and shipment. Port, transit time and document set are confirmed with your quotation. We do not assume them in advance.

Packing details, carton specs, HS code and compliance documents are issued with the quotation for your order, so the figures match what actually ships.

 

The plant behind the price

 

Xi'an Tianlei Rubber Technology has been making cork products since 2007, in a 22,000 m² plant with 15 production lines, exporting to more than 40 countries. Coasters, stoppers, and yoga and fitness products carry most of the volume.

2007Established

22,000 m²Plant

500,000Monthly output

40+Countries

15Production lines

Certificates and test reports are not published on this page. They travel with the quotation, along with the packing list, the HS code and the food-contact standard that applies to your market. No customer testimonial section yet. It goes up when there is a real quote with an industry and an annual volume behind it. No invented reviews.

 

Questions buyers actually send

What is the smallest and largest diameter you can make?

60 to 200 mm. 100 mm is the standard stock size and the one most bar and hotel supply runs on; anything between 60 and 200 mm is cut to your drawing. Diameter tolerance is plus or minus 5 mm.

 

Is the dark colour a dye, or is the cork naturally that dark?

It is carbonized, not dyed. The discs go through a kiln, and the darkening runs through the full thickness - scratch one and you see the same colour, not a lighter core. Cork is not naturally this dark: any supplier who tells you it is has either not visited a kiln or is not telling you the whole story.

 

Can these go through a commercial dishwasher?

Unsealed cork takes on water at the cut edge and starts to delaminate after repeated cycles. If your operation machine-washes, take the 10 mm body and the rounded edge, and expect a service life measured in months rather than years. If you need years, wipe clean only.

 

Can I print full colour on the dark face?

Yes, with a white underlayer printed first. It adds a step and shows as a slightly raised white field under the artwork. If your design needs the cork grain to show through, tell us - a light natural tone usually prints better than a carbonized one, and we will confirm what is available for your quantity.

 

What file do you need?

Vector: AI, EPS, PDF or SVG, with text converted to outlines. For laser, a single-colour vector at 100% scale. We send a proof before production; nothing goes on the machine without your written approval of that proof.

 

Will the logo wear off?

Depends on the method. Laser and deboss do not wear - they are the material, not a layer on it. Silkscreen wears at the edges under sanitizer: the edge of the mark goes first, and on a coaster wiped several times a shift that is a matter of months. CMYK over a sealed face sits in between. We will tell you which one we would choose for your venue type.

 

What is the MOQ?

2,000 pcs for a custom die-cut shape. Blank and printed minimums are set per specification rather than published as one number: tell us the diameter, the logo method and the quantity you need, and we answer with the minimum for that exact combination the same day.

 

Why is there no price on this page?

Because the price moves with diameter, thickness, print method, packaging and quantity, and one number would be wrong for almost everyone who reads it. Send the diameter, quantity and logo method and you get a real unit price the same day, not a range.

 

What are the lead times?

Sample 3 to 7 days from artwork approval. Bulk 30 days after sample approval. Neither includes transit. If you have a fixed landing date, tell us first - see section 6.

 

Is CE marking available?

No, and we will not pretend otherwise. Cork coasters are outside the scope of the CE marking directives. What applies to them is food-contact legislation - FDA 21 CFR 175.300 in the US, EU 1935/2004 and LFGB in Europe - and we do not hold a standing test report for every one of those. Tell us the market and the standard your specification cites, and we confirm what we can supply before you commit to a quantity.

 

What happens if part of the shipment is defective?

Tell us within 3 days of arrival with photos of the affected cartons. For a defect that is our fault we replace or credit, your choice. Three days is short and we know it: it is the window in which we can still trace the batch and act. If you need longer for retail inspection, say so before the order and we will agree it in writing.

Hot Tags: Dark Cork Coasters, Made to Your Diameter, Thickness and Logo, China Dark Cork Coasters, Made to Your Diameter, Thickness and Logo manufacturers, suppliers, factory, Cork Ball Lid Jar, Candle Jars With Cork Lids, Cork Square, Cork Covering, Wooden Natural Cork, Personalized Cork

Send Inquiry